|
|
|
|
Thanks for all the questions and suggestions regarding Mobile Registry
Editor, it's nice to see that MRE users have a healthy dose of curiosity. To
date I've tried to answer questions individually but with all the work
piling up at my day job (yeah I have one) I haven't been able to email
everyone back. Going forward I'll try to address the questions I get
most often here.
How does MRE "work"? Ya ya I know it connects to my device but how?
MRE works by "talking" to your device over what is known as the Remote
Application Programming Interface. RAPI is installed with ActiveSync
and its purpose is to allow desktop applications to communicate with a
Smartphone or Pocket PC. Developers love it because it's great for lots
of things, like accessing the registry. ActiveSync uses it extensively, as do many other
applications, including MRE. It also happens to be what allows you to
access the files and folders on your PDA from the comfort of your PC.
Why do I get "Access Denied" errors on my Smartphone (C500, E200 etc...) WHY?!
On Smartphones (soon PPC as well) there is a specific security policy
that can be used to control how RAPI works (see above for what RAPI
is). This policy is what carriers use to allow, prevent or restrict
access to certain remote functions. For example, Orange in part uses it
to restrict remote access to the HKLM and HKUSR registry hives. So
because some telecoms restrict or block RAPI, MRE can't by default work
with all phones. This sucks but thankfully there are
workarounds.
I get "Access Denied". How do I get around this?
After scouring forums and enlisting the help of some brave MRE users
(who were willing to try any screwy method I threw their way) I've
found that there are more than a few ways to make money in World of
Warcraft fix the "Access Denied" issues. The whole process is rather
confusing and to be honest I was still confused until I started writing
it down here. Which means this is truly confusing or I'm just thick
headed. Sadly I think it might be the latter. ;)
Words of caution. If after trying any of these applications your
phone explodes, causes you to hear voices, or turns you into a conservative republican, don't blame me!
All the usual free software disclaimers apply. Use at your own risk,
your results may vary, NATURALLY CARB FREE.
RapiConfig.exe:
RapiConfig is a tool provided by Microsoft and is included as part of
the Windows Mobile SDK. It is a desktop application whose purpose is to
remotely send configuration changes to a Smartphone or PPC (using
ActiveSync and RAPI). It has helped 3 people so far, all of which had a
C500 or E200.
* This *only* tries to enable RAPI nothing else.
* Make sure you have ActiveSync installed and your phone connected via USB or serial port.
* Download EnableRAPI.zip
* Unzip the file
* Double click "EnableRAPI.bat"
* You will see a message indicating that it worked or failed.
AEConfig.exe:
Behind the scenes AEConfig works exactly like RapiConfig, that is, by
sending configuration changes to your device. However, rather running
on your desktop it's necessary to copy it and run it on your
Smartphone. In my experience this has worked for about 10-15 people so
far.
If you're using an Orange SPV C500, C550, E100 or E200 you should have
no problem running this app. It's digitally signed with an Orange
certificate which means it has permission to do what it wants with your
phone, in this case totally unlock it (right click AEConfig.exe ->
properties -> digital signature)
* This tries to completely unlock your phone. Including unblocking RAPI and removing application certification.
* Make sure you have ActiveSync installed and your phone connected via USB or serial port.
* Download AeConfig.zip
* Unzip the file
* Copy the "Disable Security" shortcut in "Storage\Windows\Start Menu"
* Copy "AEConfig.exe" and "DisableSecurity.xml" in the "Temp" folder
* Now on your Smartphone run "disable security" from your phones start menu
* You should be prompted that it worked (might take a bit)
Unlocking Websites:
E100, E200, C500/C550 and MPX 200 owners can also try to disable
security over the air. From the looks of
it, it only removes application certification (app locking) and I don't
think it will necessarily make MRE work. If anyone tries it let me know.
http://www.coolsmartphone.com/app-cert.htm has some more information on the MiTAC, MPX 200 and Mpx220.
If you're still out of luck there are websites that attack the problem
from a different angle. Most work by updating the ROM on your phone.
I've read more than one forum post about someone's phone being hosed as
a result. Sounds like over kill to me. Kind of like using a sledge
hammer on a 2" nail. Risk takers can check out sites like www.UnlockThatMobile.com or Google it.
...
|
Posted Aug 08, 2005 @ 3:31 PM |
Comments: 154
|
Comments
|
franco
(8/23/2005 7:02:52 AM)
|
| |
looked good but shortcut "disable security" in start menu is not digitaly signed so AEconf.exe program wont run. |
|
franco
(8/24/2005 7:37:15 AM)
|
| |
sorry AEConfoig is not digitaly signed |
|
Greg
(9/1/2005 1:30:50 AM)
|
| |
Franco, sorry for the late reply I've been on vacation. Can you tell me what phone you were trying to run AEconfig on? The application is digitally signed but only with an Orange certificate.
If you have an Orange phone and AEConfig still doesn't work you can try disabling security over the air (link in 3rd section). Then try running AEConfig again. |
|
hashmio
(9/6/2005 11:01:04 AM)
|
| |
I am having the same problem as franco, I have a SPV C550. The security over the air link does not work. Please can you help |
|
Greg
(9/7/2005 11:54:56 AM)
|
| |
Hashmio, after you tried disabling security over the air did you try AEConfig again? |
|
somatik
(11/10/2005 8:28:29 AM)
|
| |
greg, you're a nerd tool. |
|
MattL
(11/16/2005 8:00:42 AM)
|
| |
Config failed (0x80070005): Access is denied
orange spv c550 connected by USB activesynch |
|
Greg
(11/17/2005 2:32:11 AM)
|
| |
MattL, try disabling security over the air (third section) and then run AEconfig. Hopefully that will work. |
|
petr
(11/25/2005 1:23:20 AM)
|
| |
well, it doesn't |
|
Greg
(11/27/2005 4:40:13 AM)
|
| |
Petr what phone are you using? If none of the options above worked your best bet is to try an unlocking website. |
|
Chuck
(12/5/2005 3:28:57 AM)
|
| |
Audiovox SMT 560 - WM5 ... Access denied, for the editor, and the unlock workarounds |
|
awatts
(12/17/2005 4:44:38 AM)
|
| |
To get Mobile Registry Editor to work on an Orange SPV C500 follow the instructions under "1. Enable RAPI and user provided certificates" on:
http://blogs.conchango.com/stuartpreston/archive/2005/11/10/2376.aspx |
|
Mike
(1/19/2006 2:27:03 AM)
|
| |
The certificate on aeConfig is now out of date - which is why it won;t work any more. Anyone know if there is an up to date version available?? |
|
Dave F
(1/29/2006 5:40:10 AM)
|
| |
RapiConfig cleared the registry 'Access Denied' error on my SPV M5000. Was able then to update the registry for 802.11g. Great help - thanks! |
|
Bongi
(2/16/2006 4:39:12 AM)
|
| |
How do I install the Registry editor? |
|
Greg
(2/16/2006 8:08:06 AM)
|
| |
You need to install .NET1.1 first (http://tinyurl.com/4jxar). Once that's installed just download, unzip, and run it. |
|
Michael J
(2/22/2006 6:24:10 AM)
|
| |
The AEConfig.exe stuff worked perfect for me on my UTstarcom PPC6700 running over Telus Mobility Network up here in British Columbia Canada (Vancouver Area) |
|
Dsokus
(2/26/2006 8:06:56 AM)
|
| |
I don't know if it's the right place to post it but thanks for this great little tool. Helped me to "hack into" a program I purchased that had a password bug and simply locked me out of itself. Wonderful work!! |
|
Arun KS
(3/7/2006 5:30:54 AM)
|
| |
AeConfig worked fine for my Jasjar ! thanks !! |
|
dmx_zsolt
(4/3/2006 5:56:27 AM)
|
| |
please help me! i didn't recive a confirmation code to my phone.I staid for 1 hour and nothing...
please help me for this thing
thanks :) |
|
Raithlin
(4/7/2006 1:58:16 AM)
|
| |
RAPI worked fine for my K-JAM, WinXP2. Thx. |
|
DBZero
(4/9/2006 11:46:53 AM)
|
| |
RapiConfig.exe works great on the QTEK S200, thnx a bunch! |
|
Pegasus
(4/11/2006 8:55:48 AM)
|
| |
AEConfig.exe seemed to do the trick on my HP hw6915 |
|
Tunes
(4/17/2006 9:03:37 AM)
|
| |
I have a Qtek 8300 (imate SP5m/Orange SPV C600) running WM5. Im also getting acces denied when trying to edit current_user or local_machine. Although I dont think my phone is locked, since no other program has shown any sign of the phone being locked. Still I tried unlocking it, with negative results. Any ideas to get around the problem? |
|
marconix
(4/26/2006 8:00:34 AM)
|
| |
I have a spv m5000 bat i don't live in england enymore and i would like to use it in italy but is network locked.What can I do???? Thanks in advance!!! |
|
jlmu7
(4/27/2006 1:31:41 AM)
|
| |
please anybody can application unlock the spv c600 with the aku2 updated rom please let me know of the solution thanks in advance! |
|
Bobby
(4/27/2006 1:37:41 AM)
|
| |
Active sync is the worst this MS has ever released! |
|
vipul
(4/27/2006 8:36:47 AM)
|
| |
i had a problem that my smartphone is connected to pc via activesync but is not able to transfer files and also i m not able to click on the sync button.......plesssss help |
|
Greg
(4/28/2006 2:40:34 AM)
|
| |
Hey Vipul you should post your questions in the ActiveSync newsgroup. You can use the Google web based news reader at http://groups.google.com/group/microsoft.public.pocketpc.activesync |
|
manga
(5/1/2006 6:43:43 AM)
|
| |
is it worked perfect i will tray .. the 3d is succes |
|
Lino
(5/3/2006 12:50:43 PM)
|
| |
can't get to work at all, says failed to initialize application press ok to close. any suggestions? |
|
Marky
(5/8/2006 12:01:52 PM)
|
| |
How do I get round the SIM card, I left it in the UK coz I didn't think I needed it, yet I cannot get into my C500 now.....dohhhhhhhh |
|
nitpicker
(5/19/2006 1:13:13 AM)
|
| |
For the Qtek 8310:
Navigate to: HKLMSecurityPoliciesPolicies
Click "Values" soft-key
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
Then it worked, but I had already also changed this one for another app:
Add new value "0000101b" and assign it DWORD = 1 (decimal) |
|
sidewinder
(5/25/2006 8:51:28 AM)
|
| |
Thr RapiConfig works om the orange spv m600 thanks |
|
rsbrux
(5/29/2006 9:34:27 AM)
|
| |
Figured RapiConfig would work on my SPV-M3000 (HTC Wizard), since success was reported here on SPV-M5000 (also Orange WM5).
Unfortunately, this is what I got:
Config failed (0x80070005): Access is denied.
Press any key to continue . . . |
|
rsbrux
(5/29/2006 9:48:43 AM)
|
| |
Also tried http://blogs.conchango.com/stuartpreston/files/regeditSTG.zip mentioned in link http://blogs.conchango.com/stuartpreston/archive/2005/11/10/2376.aspx supplied by awatts above. My SPV-M3000 still refused. Rough translation from German:
The file "regedit" could not be opened. Either it isn't signed with a trustworthy certificate, or one of its components cannot be found. Tra reinstalling or repairing the file. |
|
rsbrux
(5/29/2006 9:54:05 AM)
|
| |
Same error message as above from attempt to use AEconfig. Any other ideas? |
|
nOrbX187
(5/29/2006 12:57:00 PM)
|
| |
I have the XV6700 from Verizon. RapiConfig didn't work but the AEConfig worked like a charm. |
|
karinatwork
(6/1/2006 7:28:17 AM)
|
| |
RapiConfig worked on I-mate Jamin. Thanks! |
|
aes
(6/20/2006 2:07:52 AM)
|
| |
The AEConfig option worked! Using an ETEN G500. After it ran, I deleted the files from the Temp dir and lnk file from windowsstart menu thinking I no longer need them. Now when I softboot, I get an error that "AEConfig" is not there anymore and I need to reinstall. Where is this being executed from? I search the registry but couldnt find anything. Thanks |
|
netdude999
(7/4/2006 3:31:23 AM)
|
| |
http://www.sems.org/entry.asp?ENTRY_ID=157
Have Fun! |
|
greatgrains
(7/16/2006 4:15:22 AM)
|
| |
just wanted to say that aeconfig worked great on my xv6700
Thanks so much |
|
mrcarper
(7/20/2006 7:12:18 AM)
|
| |
Hey guys, I think I have a fix for the "Access Denied" error that will work for you; Neither RapiConfig nor AEConfig worked for me, which is odd, since AEConfig worked for nOrbX187, and he has an XV6700 like me... but the following is what worked for me...
All I had to do was change the two following policy-related registry entries from the WM device, using a WM Registry Editor. I got the registry entries from http://blogs.conchango.com/stuartpreston/archive/2005/11/10/2376.aspx, and the registry editor from Handando (http://www.handango.com/PlatformProductDetail.jsp?siteId=1&jid=2A897EC75DF2X7B899D8BCBAC87A9CBX&platformId=2&N=96806&Ntt=registry&productId=160555&R=160555). You can use the trial, but for $5, it seems worth it to pay the developer for having this little lightweight tool, in addition to our favorite "Mobile Registry Editor". ;)
Navigate to HKLMSecurityPoliciesPolicies
Click "Values" soft-key
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
Change "00001005" value to 40 (decimal) (recovery note: default is 16)
Reboot device.
Let me know if you have questions, by emailing mrcarper_delete_this_part@seanet.com. |
|
iNterfector
(7/24/2006 6:45:20 AM)
|
| |
AeConfig doesn't work for me, it says the certificate ain't legal(though on my pc it says it's Orange signed)
Read it's out of date, I would like to know if there is another option to disable needed certificates cuz I was going for Smartexplorer(v2.x) on my SPV C500 to get bluetooth going. I am an Orange customer. |
|
iNterfector
(7/24/2006 6:47:20 AM)
|
| |
btw, registry editor won't run yet either, I tried that earlier to c in what stage of development Quake was coming ;) |
|
Martywaz
(7/27/2006 1:46:52 AM)
|
| |
I tried to edit the two keys ( "00001001", "00001005") using a registry editor, but each time I got an access denied message. I have the new Qtek star trek phone with Cingular...bought it "unlocked". Any ideas? |
|
TomO
(7/27/2006 3:11:19 AM)
|
| |
AeConfig worked to unlock the registry on My Motorola Q - Thanks. |
|
Martywaz
(7/27/2006 7:10:42 AM)
|
| |
I tried to edit the two keys ( "00001001", "00001005") using a registry editor, but each time I got an access denied message. I have the new Qtek star trek phone with Cingular...bought it "unlocked". Any ideas? |
|
eros
(8/4/2006 7:12:50 AM)
|
| |
When I try to run the program I get an error:
The application failed to initialize properly (0xc0000135).Click on OK to terminate the application.
Can anyone help? |
|
en1gm4
(8/6/2006 8:18:03 AM)
|
| |
Thr RapiConfig works om the orange spv m600 - result, thanks. |
|
Colin
(8/8/2006 2:00:54 AM)
|
| |
On my 8500 reflashed to an i-Mate Smartflip, I had to jump through every one of the hoops mentioned here - install the signed regeditor (http://wiki.spv-developers.com/index.php/HTC_Application_Unlock_Guide), manually app-unlock the phone, install the security policies-changing CAB (http://www.sems.org/entry.asp?ENTRY_ID=157), install the MS SCM, and reprovision with a reduced security profile... but it finally did work. Thanks to netdude999 and to our gracious host :) |
|
Mike
(8/17/2006 3:30:52 AM)
|
| |
AEConfig worked on the HTC TyTN |
|
Mage
(9/1/2006 8:07:48 AM)
|
| |
AEconfig worked in HTC TyTN...God save the Greg! Amazingly "a lot of" work, just only to show the GPS settings... :P |
|
PseudoMax
(9/1/2006 10:29:59 AM)
|
| |
WELL DONE GREG!! I have just cured the 'access denied' error with AEconfig. I am running WM5 on O2 XDA Exec!! |
|
rwp
(9/14/2006 5:49:14 AM)
|
| |
just used RapiConfig on and Orange SPV M600... worked a treat! thanks! |
|
EventHorizon
(9/15/2006 4:00:26 AM)
|
| |
The Rapiconfig worked great for the Qtek 9100... Tnxs |
|
Al
(9/27/2006 9:24:00 AM)
|
| |
Thanks,"EnableRAPI.bat" seemed to do the trick on my hp 2490. No more "Access denied" |
|
Laotse
(10/4/2006 4:19:27 AM)
|
| |
Hi
Tried everything, but no chance. Ended up at Regedit messaging "unable to perfomr this operation"
I realy need help here =) |
|
CHAndy
(10/17/2006 9:06:51 AM)
|
| |
I just feel thankfull and therefore like to let all of You know the following:
I had a Problem to Sync AnyNotes (a 3rd Party Appl.) on/to my SPV-M3000/Qteq9100
as advised/described by "mrcarper" i did the following:
Changed: "00001001" value to 1
Changed: "00001005" value to 40
this solved my Issue |
|
Jim Skim
(10/19/2006 6:05:15 AM)
|
| |
I just ran AEConfig on my T-Mobile Vario II (it's really a TyTN). So far all seems fine, at least it didn't blow up. No more "Access denied" problem. |
|
mario
(11/2/2006 9:17:28 AM)
|
| |
MDA Vario Smartphone works with
EnableRAPI.bat
thanks a lot |
|
Freeco
(11/4/2006 8:47:54 AM)
|
| |
I had the "Access denied" error on my Acer n310.
EnableRAPI didn't work (also Access denied), but AEConfig did the trick :-) |
|
Cortex
(12/5/2006 5:09:26 AM)
|
| |
AEConfig worked fine on my i-mate K-JAM. Thank you! A2DP enabled with AKU2. |
|
Simon
(12/9/2006 10:16:43 AM)
|
| |
Worked perfectly on a Cingular Blackjack (runs in about 2 seconds). Thanks! |
|
therry
(12/10/2006 10:01:26 AM)
|
| |
When I try to run the program I get an error:
The application failed to initialize properly (0xc0000135).
Click on OK to terminate the application.
I have qteck 9100.
Can anyone help? |
|
Ian
(12/14/2006 5:40:43 AM)
|
| |
RapiConfig worked a treat on my iPAQ6965. Great gear! Thanks. |
|
FNuffer
(12/20/2006 3:58:44 AM)
|
| |
FWIW, the aeconfig trick worked on my Dell Axim 51v |
|
Ondrouchch
(12/28/2006 10:15:22 AM)
|
| |
Rapiconfig works for Qtek S200 as well |
|
derek
(12/30/2006 12:48:38 PM)
|
| |
Great tool and a great site. I have managed to get this to work with a Lobster 700 TV with a bit of tweaking.
You need to run SP_AllowCertificateInstall.cab
(I got it from here http://www.modaco.com/index.php?showtopic=248560)
And then install the developer certificates in SdkCerts.cab
Then use the EnableRAPI.zip as mentioned above and all is sweetness
Thanks the tool is great. |
|
rmh
(1/4/2007 3:18:36 AM)
|
| |
I am scared to unlock security without knowing how to restore it. How can I find
the original values of the parms using AEConfig.exe? I am unwilling to run Disable Security.lnk without a way of reversing the changes.
Neither EnableRAPI nor cereg can get past the Access is denied. error.
MobileRegistryEditor.exe doesn't display the
HKLM key and has no menu items for changing it even if it were displayed.
Thanks |
|
Hjortskov
(1/5/2007 2:40:02 AM)
|
| |
Tried all of the above on my Qtek 8310 including
Navigate to HKLMSecurityPoliciesPolicies
Click "Values" soft-key
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
Change "00001005" value to 40 (decimal) (recovery note: default is 16)
This doesn't work since the whole LM tree is locked. |
|
salvatore
(1/7/2007 11:01:25 AM)
|
| |
I have a qtek 8500 and cant get anything to work for "access Denied" |
|
Pat
(1/9/2007 8:51:53 AM)
|
| |
For Qtek 9000 the following works (don't change the order):
1. run rapiconfig
2. run MobileRegistryEditor
3. change HKEY_LOCAL_MACHINE/Security/Policies/Policies/00001001 to 1 (original: 2)
Now you can edit other registry keys. |
|
Steve D
(1/18/2007 7:41:08 AM)
|
| |
aeconfig worked for a Sprint ppc-6700 |
|
philpw99
(1/22/2007 5:24:28 AM)
|
| |
Thank you so much Greg! AEConfig works magic on my E-Ten m700. No more access denied! |
|
TempAgent
(1/27/2007 10:56:35 AM)
|
| |
spv f600 (qtek 8500)
Nothing works, is there any way to install custom certificates? then generate a tool with that certificate? |
|
Nicol@s
(1/31/2007 8:48:19 AM)
|
| |
Hello !! for the Orange SPV C600, just call the orange support, for install a certificat non signed, send your certificat by email, and he send it in 24hour a the new certificad signed by orange. |
|
KJH
(2/6/2007 5:07:56 AM)
|
| |
My model is hp ipaq6955.
It works completely.
Thank you so much! |
|
nick
(2/8/2007 5:18:09 AM)
|
| |
I have tried everything on a i-mate JasJam, Aka Herm100 - Cingular 8525, nothing works “access denied” I need to change the hide value on the GPS (HKEY_LOCAL_MACHINEControlPanelGPS Settings)… I want to use Google maps on it with a blue tooth receiver now that they support wm5 devices. |
|
btaplin
(2/9/2007 3:56:57 AM)
|
| |
Navigate to HKLMSecurityPoliciesPolicies
Click "Values" soft-key
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
Change "00001005" value to 40 (decimal) (recovery note: default is 16)
Worked for me. Telus Motorola Q |
|
Iain
(2/13/2007 4:29:28 AM)
|
| |
Have same problem: need to unhide GPS as per nick's post above. Not allowed to change policies values either. Phone is unlocked, is this issue down to unlocking? |
|
m33p
(2/13/2007 6:03:33 AM)
|
| |
Hey peeps, I have a T-Mobile MDA Vario (HTC Wizard/QTEK 9100) and rapiconfig worked for me without hassle. Am running the newer ROM as I know I didn't have this issue before (was on 1.6 now on AKU2 i think ).
Good luck to all, and thx for the solution :D
m33p |
|
BG
(2/19/2007 9:22:00 AM)
|
| |
HOW CAN I GET THE CODE FOR MY CINGULAR 8525 HERM100 WITH OUT HAVING TO PAY? IVE GOT THA CODE ONE TIME FROM THE PHONE COMPANY BUT IT SAYS THE CODE IS STILL WRONG |
|
Maurits
(2/25/2007 4:40:49 AM)
|
| |
AeConfig worked on my (non-branded) Samsung SGH i320. Thanks |
|
gimbal
(2/25/2007 10:00:02 AM)
|
| |
the RapiConfig hack worked well on my non-branded FSC Pocket LOOX t830. Thanks! |
|
MarkJ99
(2/26/2007 10:12:30 AM)
|
| |
I just wanted to confirm that AEConfig.exe worked perfectly and just as you described above to "unlock" and unblock RAPI on my Motorola Q (Verizon; Windows Mobile 5.0; Motorola Software Update 1/5/2006). Once RAPI was unblocked, your MRE (V1.1) program worked flawlessly and allowed me modify the registry, without seeing the dreaded "Access Denied" error message!
Seems like a lot of effort just to change the camera shutter sound on my Moto Q; but who knows what other bugs -- er, um, I mean "features" -- your registry editor will let me work around. Thank you! |
|
DomWalker
(3/9/2007 1:26:11 AM)
|
| |
I tried 2 of the methods above but couldn't get them to work. Its not a smart phone, its a PDA I'm using. A Symbol MC70. Cant seem to get it to work, getting Access Denied Errors. Any thoughts? |
|
Kevin128
(3/11/2007 7:02:27 AM)
|
| |
I have a Verizon XV6700 with Windows Mobile 5, I downloaded Google Mobile maps and it wouldn't see my Garmin Mobile 10 GPS receiver. I searched the web and found a registry change to fix the problem. I download your program MobileRegistryEditor.exe and I got "Access is denied" message. I downloaded your program AEConfig.exe and followed your instructions. I'm happy to say that now Google moblie map is linked to my GPS receiver. Thanks for your programs!!!! |
|
Badduck
(3/11/2007 9:45:04 AM)
|
| |
I successfully unlock O2 Xda Atom using RapiConfig.exe. |
|
T--
(3/14/2007 4:06:08 AM)
|
| |
Just used this on a Palm Treo 700wx
Ran AEconfig then EnableRAPI
MRE now functional Thanks! |
|
Salil Maniktahla
(3/20/2007 10:22:44 AM)
|
| |
Just wanted to let you know, RapiConfig worked for me; I was able to unlock my Cingular Samsung Blackjack to do away with the annoying startup / shutdown noises. Piece of cake! Many thanks! |
|
Guest
(3/21/2007 7:30:52 AM)
|
| |
It works 4 O2 Trion (Hermes 100), too. Thanks a lot 4 u'r tools! |
|
Tom Bowersox
(3/30/2007 1:31:50 AM)
|
| |
RapiConfig didn't work on a Motorola Q, but the AEConfig did. Thanks! |
|
Goodduck
(3/30/2007 2:42:57 AM)
|
| |
Just unlocked an i-mate JasJar (which should have been unlocked already).
This is correct. And it's all you need to do.
Navigate to HKLMSecurityPoliciesPolicies
Click "Values" soft-key
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
This is wrong.
Change "00001005" value to 40 (decimal) (recovery note: default is 16)
MS says this is the policy for unsigned CAB files. Changing it to decimal 40 seems to mean MANAGER+ENTERPRISE security roles. Leaving it as 16 is USER_AUTH, which is just fine. |
|
macaroo
(3/31/2007 9:08:30 AM)
|
| |
i have a ppc6700 (utstarcom) from Bell. used aeconfig and it worded perfectly. the others had no effect. |
|
stingray
(4/2/2007 2:53:08 AM)
|
| |
i did hard reset which solved the problem but just in case i installed AEConfig.exe which disabled security successfully. thanks a lot! cheers! |
|
stingray
(4/2/2007 9:06:21 AM)
|
| |
Hi there - I am trying to fix problem of not being able to copy/delete files on my QTEK TyTN but when I run EnableRAPI I get error message Config Failed <0x80004005>: Unspecified Error
What should I do? |
|
stingray
(4/2/2007 10:56:23 AM)
|
| |
Hi there - I am trying to fix problem of not being able to copy/delete files on my QTEK TyTN but when I run EnableRAPI I get error message Config Failed <0x80004005>: Unspecified Error
What should I do? |
|
marfpilf
(4/2/2007 12:31:55 PM)
|
| |
Worked for my Motorola Q (Silver) MOL2 firmware |
|
fitty
(4/5/2007 7:41:36 AM)
|
| |
using the rapiconfig method allowed me to add the BtA2dpSnd key to HKEY_LOCAL_MACHINEDriversBuiltIn which was previously Access Denied on my imate sp5. |
|
kerapolis
(4/12/2007 6:14:40 AM)
|
| |
i'm trying to unlock my PN820, neither of those files worked. another reg editor said it couldn't install, prolly because it's windows smartphone edition, i guessed.
does anyone else have one of these and want to help me out? so far, i'm getting nowhere. |
|
Gewse
(4/13/2007 2:16:06 AM)
|
| |
Just unlocked my Treo 750 with AEConfig
No more access denied error when using MRE
Im using a Telstra (Australia) supplied handset |
|
Pete
(4/15/2007 6:04:48 AM)
|
| |
Able to edit previously locked registry entries after using EnableRAPI on my Dopod S301. Thanks |
|
Cingular Sucks
(4/26/2007 11:58:44 AM)
|
| |
Simon / Salil,
Could either of you tell me exactly how you got it to work? I have a Cingular Blackjack as well and even after running RapiConfig I am unable to access the registry.
Am I doing something wrong? |
|
lingster
(4/28/2007 12:18:36 PM)
|
| |
RAPI config worked on my Dopod C800/HTC P4350! Many thanks for a cool app! |
|
Mark
(5/3/2007 5:50:32 AM)
|
| |
Hi, great registry editor. Unfortunately still trying to get past the access denied when i try to change somethings. I have a jaq3 which i updated to wm6. It works really well but funnily the battery icon on the taskbar stays the same no matter how the battery is unless i plug in and remove the usb or else. If i go to power settings it shows the real state of the battery no problem. I have been looking at the registry to see what the problem is and found at
HKEY_LOCAL_MACHINEDriversBuiltInBattery
PollInterval 4294967295
and think maybe the pollinterval is too high. Unfortunately i cant change it till i get access, rapi did not work. Anyway if anyone can help me sort this out it would be great as i am not really sure what i am doing but it is annoying thinking your battery is full when its not and checking it all the time sucks. thanks |
|
yantra
(5/5/2007 5:15:47 AM)
|
| |
Orange SPV M3000 (HTC 9100)
RapiConfig.exe + Mobile Registry Editor worked great on Win XP. Thanks |
|
mascot
(5/9/2007 6:28:41 AM)
|
| |
Let me first of all express my gratitude for the wonderful work you have done in enabling me to be able to sync my O2 Xda Exec with my office laptop that runs the sygate security firewall through the use of the AEConfig utility which made possible the editing of the registry.
However, i noticed a slight change in the behaviour of my PDA. Prior to the registry change, i could connect to the internet using Activesync through my home desktop internet connection and my office LAN network respectively. somehow that ability seemed to have been lost.Would you know what i need to do to have this restored?Any registry key changes? |
|
ash
(5/11/2007 5:30:29 AM)
|
| |
um i'm not a geek and still can't do this what are the steps you need to take to get the orange imate vga phone to display vga media? |
|
abdekker
(5/11/2007 6:13:55 AM)
|
| |
I was also able to get "Access Denied" cleared by following the tweak at:
http://blogs.conchango.com/stuartpreston/archive/2005/11/10/2376.aspx |
|
abdekker
(5/11/2007 6:14:32 AM)
|
| |
Oh, forgot to mention that I'm using WM5.0 on an Acer n311.
Great app, thanks! |
|
dimesacks
(5/18/2007 8:15:52 AM)
|
| |
AEConfig worked on my Sprint Moto Q.
Thanks! |
|
g-rho
(5/22/2007 3:00:42 AM)
|
| |
AEConfig worked great on my Sprint PPC-6700. Thank you! |
|
BigOrnage
(5/25/2007 4:39:53 AM)
|
| |
I got my Sprint Q with the latest software update out of the box and AEConfig worked on my Sprint Moto Q like a charm. |
|
Packfoolp
(6/3/2007 2:17:35 AM)
|
| |
AEconfig link is down! mirror anyone? |
|